Campbell CS135, User Manual

Page: 33 / 70

User Guide
25
command)
Line Example line output
8 Heaters A B C
Description of the line sections
Section Description
A Hood blower mode
B Internal heater mode
C Laser heater mode
Line Example line output
9 MCFG X A B C D E
Description of the line sections
Section Description
X Message interval (Note: Refer to the MCFG command)
A Message ID A (Note: Refer to the MCFG command)
B Message ID B (Note: Refer to the MCFG command)
C Message ID C (Note: Refer to the MCFG command)
D Message ID D (Note: Refer to the MCFG command)
E Message ID E (Note: Refer to the MCFG command)
Line Example line output
10 Angle A B C
Description of the line sections
Section Description
A X axis tilt
B Y axis tilt
C Beam angle from vertical
Line Example line output
11 Units A
Description of the line sections
Section Description
A Measurement units and tilt correction. (Note: Refer to the UNITS command)
Line Example line output
12 TRH A B C
Description of the line sections
Section Description
A Sensor internal temperature reading in degrees Celsius.
B Sensor internal humidity reading as a percentage
C Sensors internal dew point value in degrees Celsius
Line Example line output
13 T A B C D E F
Description of the line sections
Section Description
A External fan blower assembly temperature in degrees Celsius
B PSU internal temperature in degrees Celsius
C TOP board laser monitor temperature in degrees Celsius
D TOP board calibration LED temperature in degrees Celsius
E Laser module temperature in degrees Celsius
F Photo diode module temperature in degrees Celsius
Line Example line output
14 SupplyVoltage A B
Description of the line sections
Section Description
A DSP board supply voltage
B PS135E internal supply voltage