User Guide
59
7.4 Removing the Enclosure Lid
In some circumstances it may be necessary to remove the lid covering the
electronics unit, for example to replace desiccant or carry out a hardware reset.
This is accomplished by removing the four screws as shown in Fig 7.2.
Fig 7.2 Removing the Enclosure Lid
Opening enclosure lid MUST be carried out by a
competent person
Removing the enclosure lid may expose hot surfaces
The unit will still be powered by the battery even if the mains is
disconnected.
Do not use any grease or oil on any seals including the enclosure lid
gasket. The silicone rubber seals used throughout the CS135 can be
damaged by some mineral oils.
WARNING
WARNING
NOTE
NOTE
Summary of Contents for CS135
