PRO-Diary User Guide 1.2.1 10/02/15
Page
9
2.3 Users upgrading from an earlier version of the Software
Upon following the procedure described in
Section 2.2
, users upgrading older
versions of software may be asked if they wish to repair or remove the existing
version of the software when the new software installation is run for the first time.
The option to
remove
should be selected and then the software installation run
for a second time to install the new version as described in
Section 2.2
.
A message warning that ‘Publisher cannot be verified’ may be displayed – click
‘Run’ to accept. (this is a Windows security warning and is not a problem).
2.4 Installing the USB Drivers
If the Installation menu is not already displayed, insert the supplied CD ROM into
the CD/DVD drive on the host PC then connect the PRO-Diary to a free USB
Port using the cable provided. The Installation menu should be automatically
displayed (as shown in Section 2.2).
Depending upon the operating system in use and the current driver status, the
computer may
display a message saying ‘Found New Hardware’ and will then
load the drivers with no user intervention. If the drivers loaded automatically,
simply close the installation menu and the drivers should be ready to use.
If the drivers do not load automatically, you should
select ‘Manually Install
CamNtech
USB Drivers’ and carefully follow the on-screen instructions. If you
have any problems installing the drivers, please read the help document and
download the latest drivers from
http://www.camntech.com/drivers
During manual installation, a screen may appear that tells the user that the driver
is not digitally signed by Microsoft.
Select ‘Continue Anyway’ (Please note that
this is NOT a problem and just means that the CamNtech version of the driver
software has not been assessed by Microsoft. In fact the actual drivers are
Microsoft approved). The drivers will be installed and the computer will then tell
the user that the new hardware is ready to use. If you change the USB port that
the reader is plugged into then the driver may be automatically re-installed by
Windows. This is an automatic process and the user need take no action.
