SECTION 2: SETUP / SECTION 3: PROGRAMS & STATIONS
®
making
since 1986
water work
3.
Enter the first character of the
password by pressing the
PLUS
or
MINUS
key until the character
appears.
4.
Press the blue
ARROW
keys to move
the cursor to the next character, repeat
the process described above until all
three password characters appear.
5.
Press the
PUSH TO LOG
IN
Menu key. A message will appear
confirming that the log in was
successful and the LOG OUT prompt
will appear.
Note:
Access Control Codes are set up and sent
using
Command CENTER
software.
Note:
Any screen blocked from use by Access
Control Codes will issue an advisory to the user, and
block any programming changes that particular
screen.
THIS CONCLUDES THE ACCESS CONTROL
SECTION
SECTION 3: PROGRAMS & STATIONS
The Programs & Stations section of the controller is
used for programming or viewing the following:
•
Start Times & Water Days
•
Individual station programming
•
Copy Station to another Station or Program
•
Viewing stations by program
•
Assign Program Priorities
•
Adjust stations or programs by a percentage
3A. START TIMES & WATER DAYS
The Start Times & Water Days section of the
controller is used to setup individual program start
times, program name (optional),number of days in a
schedule, individual program priorities, schedule
days, and stop times.
From the Main MENU screen:
1.
Press the
PROGRAMS & STATIONS
Menu key.
2.
Press the
START TIMES &
WATER DAYS
Menu key.
The START TIMES & WATER DAYS screen is
displayed (Figure 3.1).
STOP TIME : OFF
WEEK 1 on -- on -- on on on
Sun Mon Tue Wed Thu Fri SAT
Number of Days in Schedule : 07
START TIMES & WATER DAYS
Name : . . . . . . . . . . . . . . . . . .
Program : PROG A Sart Time : 11:30PM
Figure 3.1
3.
Press the blue
ARROW
keys to move
the cursor to the setting you wish to
change.
4.
Press the
PLUS
or
MINUS
keys to
change the highlighted setting.
