®
SECTION 10: MANUAL KEY / SECTION 11: FLOWSENSE
®
(-FL)
making
since 1986
water work
4.
Press the
PLUS
or
MINUS
keys
to set the time that you want the
Hold-Over irrigation to begin.
5.
Press the blue
ARROW
keys to
highlight the Stop Time.
6.
Press the
PLUS
or
MINUS
keys
to set the Stop Time.
7.
Press the blue
ARROW
keys to
highlight the Schedule days.
8.
Press the
PLUS
or
MINUS
keys
to turn on the days that you want
the Hold-Over to be used on.
9.
Press the
MAIN MENU
key to
return to the MAIN MENU
screen.
CAUTION:
No Water Days prevents the Hold-Over program
from Running.
THIS CONCLUDES THE USE HOLD-OVER
SECTION
SECTION 11: (-FL) FLOWSENSE
®
The Calsense
FLOWSENSE
®
option allows the user
to manage an irrigation system that has one or more
points of connection and one or more controllers
sharing these points of connection.
FLOWSENSE
®
affords the user the following:
•
No scheduling conflicts between multiple
controllers
•
Eliminates relays when sharing pumps or
master valves with several controllers
•
Manages the number of valves ON based
upon flow capacities
•
Water management capabilities with or
without a flow meter
•
Pump performance managed for electrical
savings
•
Setup in the field without a central computer
Note:
The above listed items are only feasible with
two or more controllers in a communications chain.
11A. MULTIPLE CONTROLLER
COMMUNICATION SETUP
Note:
A chain is defined as a set of controllers
connected together via the same communications
type and / or frequency.
Note:
All of the controllers in the chain must be able
to communicate with each other via (
-SR
) Spread
Spectrum Radio, or (
-M
) Hardwired.
From the MAIN MENU screen:
1.
Press the
SETUP
Menu key.
2.
Press the
COMMUNICATIONS
Menu key.
The COMMUNICATION ADDRESS screen is
displayed (Figure 11.1).
NO
Controller Info
Communications Address: ! ! A
other controllers to share MASTER
VALVES, FLOW METERS, or PUMPS?
ET2000e-40-M-SR-FL (602.a)
does this controller coordinate with
Using FLOWSENSE Technology
Figure 11.1
