Operation
34
P/N 113564 Rev. 2
Twister II Robot User’s Manual
Caliper Life Sciences, Inc.
Setting up a Storage Configuration (Continued)
13
For any tip boxes, enter the height (in millimeters) of the tip box
base in the
Tipbox Base Height
column. For material
specifications, see the manufacturer’s documentation.
14
Click the
OK
button. If there are not enough racks in the system
for all of the materials required by the application, an error
message opens as shown in
Figure 10. Rack Error Message
Click the
OK
button to close the error message and re-configure
the racks. Be sure to enter an accurate material count per rack.
If you are still unable to fit the materials into the racks, you must
sequence or schedule the application for fewer runs in the
CLARA software.
15
The
New Stack Storage Configuration
window opens as
shown in
Figure 11. New Stack Storage Configuration Window
