CAKEWALK Sonar V-STUDIO 100 Page 8 Getting Started Manual Download

Page: 8 / 60

Installation and Registration

Disconnect all USB cables (except those for a USB keyboard and/or USB mouse, if used), then start

up Windows.

Close all currently running software (applications).

Also close all windows that are open. If you are using software such as antivirus programs, be sure to close these

programs as well.

Insert the included “SONAR V-STUDIO 100 Driver CD-ROM” into your computer’s CD/DVD-ROM

drive.

Select “Start-Run” and enter “d:\drivers\vista32\setup.exe” to start the driver installer.

(where d:\ is your disc drive).

* If a message informs you that

“Driver installation must be performed by an administrator,”

you must log on to

Windows as a user whose Account Type is Administrator, and then perform the installation.

A confirmation screen regarding User Account Control appears, click [Continue].

The message “VS-100 Driver will be installed on your computer.” appears. Click [Next].

* If any other message appears, follow the directions of the message.

Click [Next] to begin installation.

If a dialog box regarding Windows Security appears, click [Install].

The message “Ready to install the driver.” appears.

Leave the screen open; do not close it at this point.

* If any other message appears, follow the directions of the message.

Windows Vista Users

VS-100_install_e.book 8 ページ２００９年３月９日　月曜日　午後８時５６分

Summary of Contents for Sonar V-STUDIO 100





























































Search results

Summary of Contents for Sonar V-STUDIO 100

Reviews:

Related manuals for Sonar V-STUDIO 100

Brands by name

Popular brands

CAKEWALK Sonar V-STUDIO 100, Getting Started Manual

Search results

Summary of Contents for Sonar V-STUDIO 100

Reviews:

Related manuals for Sonar V-STUDIO 100

Brands by name

Popular brands