37
Initial Settings
We’ll arm track 1 for recording (i.e. put it in record-ready mode).
1.
Press the SONAR V-STUDIO 100’s
[DISPLAY]
button to switch to the control surface screen.
If a different screen is shown, press the
[DISPLAY]
button once again.
2.
Make sure that
Track1
is shown in the control surface screen.
If
Track1
is not shown, press the SONAR V-STUDIO 100’s track select button to make the screen indicate
Track1
.
Alternatively, you can click SONAR’s track 1 icon.
3.
Press the SONAR V-STUDIO 100’s
[ARM]
button.
The SONAR V-STUDIO 100’s
[ARM]
button and SONAR’s track 1 ARM button will both light, indicating that this track is
armed for recording.
You can also arm the track by clicking the ARM button for SONAR’s track 1.
fig.Arm-btn.eps
5. Arm the desired track for recording.
VS-100_install_e.book 37 ページ ２００９年３月９日 月曜日 午後８時５６分
