4-2
Voice Recognition
Using verbal commands, you can use the system
without manually pressing buttons and turning the
TUNE/SEL knob.
Activating Voice Recognition
To activate voice recognition, press the voice
recognition steering wheel control.
The voice recognition
steering wheel control is
located on the right spoke
of the steering wheel.
Once you press the control, a tone will sound. After the
tone, say the command clearly and slowly. When the
system is finished recognizing the command, it will
either perform the commanded function or issue an error
message, such as “invalid command” or “command
not recognized.”
The invalid command message indicates that the
command cannot be used in the currently active screen.
For example, if you use the “Next Track” command
while listening to the radio, you will receive the invalid
command message because the command is for the CD
player or CD changer, not the radio.
Voice Recognition Commands
Some verbal commands are universal and can be used
from any location in the system. Others are screen
and/or menu specific. The following is a list of the
available commands and a description of each.
Universal Commands
These commands can be said from any screen, and the
system will respond accordingly.
What Can I Say?: If you say this command, the system
will respond with a list of verbal commands available to
you. The list of commands will vary depending upon
which screen is currently active.
Acknowledge/Ok: If you say either “Acknowledge”
or “Ok” when a Driver Information Center (DIC)
warning message is displayed, the message will be
cleared from the screen. For more information on DIC
messages, see “DIC Messages” in the Index of your
CTS owner’s manual.
Summary of Contents for CTS 2003
Page 1: ......
