1-7
For example, on the Radio screen shown previously,
you can tune to different stations manually by turning the
TUNE/SEL knob. To access the FM Menu, you press the
knob once. To seek up or down, you press the right or left
arrow on the SEEK/SCAN switch. To scan stations up or
down, press and hold the SEEK/SCAN switch until Scan
appears on the display. Radio also appears on the display
as the title of the currently active screen.
AVC (Automatic Volume Compensation)
Information
This area of the screen is used to indicate if AVC is
on or off. See “Setting the Tone” in the Index for
more information.
Multi-Function Buttons
These buttons are called multi
-
function buttons because
the function of each button changes depending upon
which screen is active. The multi
-
function buttons with
the dot on them, located to the right of the display,
control the six prompts at the right of the screen.
When the Radio screen is active as shown in the previous
example, these buttons represent the programmed preset
radio stations for each band (FM1, FM2, AM), but
when Navigation is active, these buttons represent other
functions. See “Navigation Multi
-
Function Buttons”
in the Index for more information.
If you see a triangle or carat in the upper left corner of
the prompt, it means that the multi
-
function button is
programmable. Once the function you want is active,
press and hold the button until you hear a beep. The new
function will be programmed and displayed as the prompt
for that multi
-
function button. For more information on
programming the multi
-
function buttons for preset radio
stations, see “Setting Preset Stations” in the Index.
Summary of Contents for CTS 2003
Page 1: ......
