1-16
To select one of these modes, press the button to the
right of the screen with the dot on it that corresponds
to the prompt. An X will appear in the box next to it
to show it has been selected.
You can select day or night mode regardless of the
lighting conditions.
In addition the contrast and brightness may be adjusted
as desired.
To adjust contrast or brightness press the multi
-
function
button that corresponds to the prompt at the right of the
screen. Then turn the TUNE/SEL knob to increase or
decrease the contrast or brightness. The bar graph on the
screen will reflect the turning of the TUNE/SEL knob.
Voice Volume: This menu item allows you to turn on
and off navigation voice prompts and to adjust the
volume level of all the voice prompts you receive from
the system. To learn how to adjust the voice volume,
see “Interrupt Volume” in the Index.
Clock: To set the time on the analog clock located on
the instrument panel cluster, do the following:
1. Press the MAIN button located to the lower left of
the display to access the system’s Main Menu.
2. Press the multi
-
function button next to the Setup
prompt to access the Setup menu.
3. Once the Setup menu is displayed, press the
multi
-
function button next to the Clock prompt.
See the information following this list for a
description of Clock menu items.
4. Set the time using one of the menu items listed.
Hr (Hour) +/
-
: Press the multi
-
function button next to
Hr+ or Hr
-
to manually advance or reverse the hour on
the clock.
Min (Minute) +/
-
: Press the multi
-
function button
next to Min+ or Min
-
to manually advance or reverse
the minutes on the clock.
Auto GPS (Global Positioning System) Update:
This menu item allows you to use the Navigation
System’s GPS to set the time automatically. The system
acquires the information from the satellite used for the
navigation system.
Summary of Contents for CTS 2003
Page 1: ......
