4-9
Memo (Memorandum) Delete X: This command
instructs the system to delete a previously recorded
memo saved to a specific location. To use this
command, you must know the location of the memo that
you want to delete. For example, if you want to delete
the memo saved in location one, say “memo delete one.”
Yes: This command confirms choices made while using
the Voice Memo screen. For example, if you use the
memo delete command, the system will request a
confirmation of the deletion. If you wish to delete the
memo, you must reply with “yes” or the system will not
delete the memo.
This command is only available in the Memo
Delete screens.
No: This command cancels choices made while using
the Voice Memo screen. For example, if you use the
memo delete command, the system will request a
confirmation of the deletion. If you say “no,” the system
will not delete the memo.
This command is only available in the Memo
Delete screens.
Navigation Commands
The following verbal commands can be used when the
Navigation system is active.
North Up: This command instructs the system to switch
from the current view to a view of the map where north
is always “up” on the screen. See “Symbols” in the
Index for more information.
Heading Up: This command instructs the system to
switch from the current view to a map view where the
vehicle appears to be traveling in an “up” direction on
the screen regardless of compass direction. See
“Symbols” in the Index for more information.
Bird View: This command instructs the system to
switch from the current view to the bird view of the
map. This view allows you to see an overall general
picture of the map from above as if you were a bird
flying over the area. See “Symbols” in the Index for
more information.
Summary of Contents for CTS 2003
Page 1: ......
