Cadillac CTS 2003 Supplement Manual Download Page 15

Page: 15 / 85

1-12

Voice Memo (Memorandum)

The Voice Memo screen allows you to record and
playback up to 10 personalized messages.

You can perform the following using the Voice Memo
multi

function buttons:

D Record
D Append
D Play
D Delete
Turn the TUNE/SEL knob to scroll through any previously
recorded messages. Press the knob to select a message.

Record

Press this multi

function button to begin recording a

message. It will start recording when you begin speaking.
It will cancel the recording if you do not speak within
10 seconds.

Append

Press this multi

function button to add to a previously

recorded message. To use this feature do the following:

1. Turn the TUNE/SEL knob until the message you

want to add to is highlighted.

2. Press the Append multi

function button. You can

then begin recording the additional information.

Summary of Contents for CTS 2003






















































































Search results

Summary of Contents for CTS 2003

Reviews:

Brands by name

Popular brands

Cadillac CTS 2003, Supplement Manual

Search results

Summary of Contents for CTS 2003

Reviews:

Brands by name

Popular brands