3-8
TUNE/SEL (Select): Use this knob located to the lower
right of the display to manually tune the radio, access
the radio menus and scroll through the menu items. See
“FM Menu” listed previously in this section for more
information.
Finding a Station
BAND: After you access the main radio display, press
this button repeatedly to scroll through the three bands:
AM, FM1 and FM2. The one currently selected is
shown near the top of the display. For example, Radio
FM2 will be displayed when the FM2 screen is selected.
Tune: Turn the TUNE/SEL knob to select radio
stations manually.
SEEK/SCAN
: Press the left or right arrow to
seek to the previous or next station. The radio will go to
the next station with a strong signal only. If you wish to
continue seeking, press the arrow again. The volume
will mute while seeking.
To scan stations, press and hold the left or right arrow
for two seconds until you hear a beep. The radio will go
to the next or previous station, play for a few seconds,
then go on to the next station. The radio will scan to
stations with a strong signal only. The volume will mute
while scanning. Press either arrow again to stop
scanning.
To scan preset radio stations, press and hold the left or
right arrow for more than four seconds. You will hear
two beeps and Preset Scan will appear on the screen.
The radio will go to the first preset station stored, play
for a few seconds, then go on to the next preset station.
The radio will scan preset stations with a strong signal
only. The volume will mute while scanning. Press the
left or right arrow again to stop scanning presets. See
“Setting Preset Stations” later in this section for more
information.
Summary of Contents for CTS 2003
Page 1: ......
