manualshive.com logo in svg

Cadillac CTS 2003, Supplement Manual

Share
Download
Cadillac CTS 2003 Supplement Manual Download Page 52

2-30

Nearby POI (Points of Interest): This feature allows
you to limit your choices of a Nearby POI to within a
30 mile (48 km) radius of one of three locations: current
location, waypoint location or destination location.

After entering the Nearby POI screen, use the location
multi

-

function button to select which one of the three

locations you want to search for Nearby POIs. The
location screen shows a list of all points along your trip.
Use the TUNE/SEL knob to select the desired location.
Press the Back multi

-

function button to return to the

Nearby POI screen.

The selected location will be shown at the bottom of 
the screen.

Choose a category from the Nearby POI list using the
TUNE/SEL knob. Once a category is selected a list of
available POI will be displayed. The points are listed in
order of straight

-

line distance from the selected location.

If the selected location is the current location, an arrow
will show the direction of the Nearby POI.

Summary of Contents for CTS 2003






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands