1-11
The following multi
-
function buttons are available in
the New Entry screen:
Receive: If you want to transfer information stored
in a Palm hand
-
held computing device, press the
Receive multi
-
function button. The Beam screen will be
displayed, and you will be prompted to transfer the data.
See “Beam” in the Index for more information.
Edit: If you want to change any of the stored
information, you can use the Edit multi
-
function button.
Use the following steps to edit information stored in the
address book:
1. Perform Steps 1 and 2 for accessing stored
information listed previously under “Address Book.”
2. Press the Edit multi
-
function button once the name
you want is highlighted.
3. Use the TUNE/SEL knob to change the stored
information. Press the Done multi
-
function button
when you are finished with each field.
4. Press the Back multi
-
function button to exit the
Edit menu.
Delete All
If you select Delete All from the Address Book screen,
the system will ask you if you want to delete all the
stored information in the address book. If you press the
yes multi
-
function button, all stored information will be
deleted from the Address Book. If you press the no
multi
-
function button, you will return to the Address
Book screen and the information will not be deleted.
Setup
The Setup Menu is used to adjust the basic features of
the system to your preference. See “Setup Menu” later
in this section for more information.
Feat Prog (Feature Programming)
The Feature Programming menu is where you can
customize the programmable features on your vehicle to
your preferences. For more information, see “Vehicle
Programming and Personalization Features” in the Index
of your CTS owner’s manual.
Summary of Contents for CTS 2003
Page 1: ......
