Cadillac CTS 2003 Supplement Manual Download Page 32

Page: 32 / 85

2-10

Map Adjustments

The system allows you to adjust the scale of view on the
map. Also, the map will scroll automatically based on
the direction you are traveling.

To view a larger or smaller scale of the map, press the
multi

function button next to the Zoom In or Zoom Out

prompts at the right of the screen. See “Zoom In/Out”
listed previously in this section for more information on
these prompts.

Map Scales

The scale of a map can range from 1/64 of a mile
(25 km) to 80 miles (128 km).

Symbols

The following symbols are the most common that
appear on the map screen:

Your current vehicle
location and direction are
shown as this symbol.

This symbol will appear
after a route has been
planned to indicate your
destination.

See “Plan a Route” in the Index for more information on
planning routes.

Summary of Contents for CTS 2003






















































































Search results

Summary of Contents for CTS 2003

Reviews:

Related manuals for CTS 2003

Brands by name

Popular brands

Cadillac CTS 2003, Supplement Manual

Search results

Summary of Contents for CTS 2003

Reviews:

Related manuals for CTS 2003

Brands by name

Popular brands