Cadillac ATS 2018 Owner'S Manual Download Page 198 | Manualshive

Page: 198 / 391

background image

Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

11349135) - 2018 - crc - 5/8/17

196

DRIVING AND OPERATING

To shift out of P (Park):

1. Apply the brake pedal.

2. Turn the ignition on.

3. Release the parking brake.

See

Parking Brake (Electric)

or

Parking Brake (Manual)

4. Press the shift lever button.

5. Move the shift lever.

If unable to shift out of P (Park):

1. Fully release the shift lever

button.

2. While holding down the brake

pedal, press the shift lever
button again.

3. Move the shift lever.

If the shift lever will not move from
P (Park), consult your dealer or a
professional towing service.

Parking (Manual
Transmission)

If the vehicle has a manual
transmission, before getting out of the
vehicle, move the shift lever into
R (Reverse) if parking on a downhill

slope. On a level surface or an uphill
slope, use 1 (First) gear. Apply the
parking brake. Turn the wheels toward
the curb for a downhill slope, or away
from the curb for an uphill slope.
Once the shift lever has been placed
into gear with the clutch pedal
pressed in, turn the ignition to off,
and release the clutch.

Parking over Things
That Burn

{

Warning

Things that can burn could touch
hot exhaust parts under the vehicle
and ignite. Do not park over papers,
leaves, dry grass, or other things
that can burn.

Extended Parking

It is better not to park with the
vehicle running. If the vehicle is left
while running, follow the proper steps
to be sure the vehicle will not move
and there is adequate ventilation.

See

Shifting Into Park (Automatic

Transmission)

and

.

For vehicles with pushbutton start,
if the vehicle is left parked while
running and the Remote Keyless Entry
(RKE) transmitter is outside the
vehicle, the vehicle will turn off after
one hour.

If the vehicle is left parked while
running and the RKE transmitter is
inside the vehicle will turn off after
two hours.

Vehicles without pushbutton start will
run indefinitely, or until the ignition
is turned off.

Automatic Transmission

The timer will reset if the vehicle is
taken out of P (Park) while it is
running.

Manual Transmission

The timer will reset if the vehicle
moves great than 4 km/h (2.5 mph).

«
...
196
197
198
199
200
...
»

Summary of Contents for ATS 2018








































































































































































































































































































































































































Reviews:

No comments

Related manuals for ATS 2018

AUDI 4G HIGHEND

Brand: KAP Pages: 20

Brand: Subaru Pages: 34

Brand: FORM FIT Pages: 2

Brand: Yakima Pages: 19

UCI-11C NTV-KIT331

Brand: Nav TV Pages: 4

Brand: Phonocar Pages: 6

Brand: TATA Motors Pages: 159

Brand: Magneti Marelli Pages: 2

Brand: Westin Pages: 3

Brand: Mercedes-Benz Pages: 296

Brand: Calix group Pages: 4

Brand: Needit Pages: 2

KIT ParkingSensor 814

Brand: Gemini Pages: 6

Brand: Huf Pages: 6

Brand: Westin Pages: 3

Brand: Subaru Pages: 399

Brand: Yakima Pages: 10

Brand: chinavasion Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands