Cadillac ATS 2018 Owner'S Manual Download Page 21

Page: 21 / 391

Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

11349135) - 2018 - crc - 5/1/17

IN BRIEF

AUTO :

Automatically turns the

exterior lamps on and off, depending
on outside lighting.

;

Turns on the parking lamps

including all lamps, except the
headlamps.

Turns on the headlamps together

with the parking lamps and
instrument panel lights.

See

Exterior Lamp Controls

148

and

Daytime Running Lamps (DRL)

150

Windshield Wiper/Washer

With the ignition on or in ACC/
ACCESSORY, move the lever to select
the wiper speed.

HI :

Use for fast wipes.

LO :

Use for slow wipes.

INT :

Use this setting for intermittent

wipes or Rainsense, if equipped. For
intermittent wipes, move the
windshield wiper lever to INT. Turn
the

INT band up for more

frequent wipes or down for less
frequent wipes.

If equipped with Rainsense and the
feature is enabled in vehicle
personalization, move the windshield
wiper lever to INT and turn the

INT band to adjust the sensitivity to
moisture.

Turn the band up for more
sensitivity to moisture.

Turn the band down for less
sensitivity to moisture.

Move the windshield wiper lever
out of the INT position to
deactivate Rainsense.

To turn the Rainsense feature on or
off, see

“

Rain Sense Wipers

”

under

Vehicle Personalization

140

OFF :

Use to turn the wipers off.

1X :

For a single wipe, briefly move

the lever down. For several wipes, hold
the lever down.

Pull the lever toward you to

spray windshield washer fluid and
activate the wipers.

See

Windshield Wiper/Washer

110

Summary of Contents for ATS 2018








































































































































































































































































































































































































Search results

Summary of Contents for ATS 2018

Reviews:

Related manuals for ATS 2018

Brands by name

Popular brands

Cadillac ATS 2018, Owner'S Manual

Search results

Summary of Contents for ATS 2018

Reviews:

Related manuals for ATS 2018

Brands by name

Popular brands