Cadillac ATS 2018 Owner'S Manual Download Page 13

Page: 13 / 391

Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

11349135) - 2018 - crc - 5/1/17

IN BRIEF

Seat Adjustment

Power Seats

High Performance Seat Shown,

Others Similar

To adjust the seat:

Move the seat forward or rearward
by sliding the control forward or
rearward.

Raise or lower the seat by moving
the rear of the control up or down.

If equipped, raise or lower the
front part of the seat cushion by
moving the front of the control up
or down.

High Performance Seat Adjustment

1. Feature Select
2. Up
3. Rearward
4. Down
5. Forward

Move Feature Select (1) to display
seat adjustments on the center
stack. Press and release or hold to
scroll through features.

Press Up (2) to make upward
adjustments of the selected
feature.

Press Rearward (3) to make
rearward adjustments of the
selected feature.

Press Down (4) to make downward
adjustments of the selected
feature.

Press Forward (5) to make forward
adjustments of the selected
feature.

See

Power Seat Adjustment

Reclining Seatbacks

Base Seat

To adjust the seatback:

Tilt the top of the control
rearward to recline.

Summary of Contents for ATS 2018








































































































































































































































































































































































































Search results

Summary of Contents for ATS 2018

Reviews:

Related manuals for ATS 2018

Brands by name

Popular brands

Cadillac ATS 2018, Owner'S Manual

Search results

Summary of Contents for ATS 2018

Reviews:

Related manuals for ATS 2018

Brands by name

Popular brands