Cadillac ATS 2018 Owner'S Manual Download Page 145

Page: 145 / 391

Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

11349135) - 2018 - crc - 5/1/17

INSTRUMENTS AND CONTROLS

143

Power Door Locks

Touch and the following may display:

Open Door Anti Lock Out

Auto Door Unlock

Delayed Door Lock

Open Door Anti Lock Out

This setting prevents the driver door
from locking when the door is open.
If this setting is on, the Delayed Door
Lock menu will not be available.

Touch Off or On.

Auto Door Unlock

This setting allows selection of which
doors will automatically unlock when
the vehicle is shifted into P (Park).

Touch Off, All Doors, or Driver Door.

Delayed Door Lock

This setting delays the locking of the
vehicle

’

s doors.

Touch Off or On.

Remote Lock, Unlock, Start

Touch and the following may display:

Remote Unlock Light Feedback

Remote Lock Feedback

Remote Door Unlock

Remote Start Auto Heat Seats

Remote Window Operation

Passive Door Unlock

Passive Door Lock

Remote Left in Vehicle Alert

Remote Unlock Light Feedback

This setting flashes the exterior lamps
when the vehicle is unlocked with the
RKE transmitter.

Touch Off or Flash Lights.

Remote Lock Feedback

This setting specifies how the vehicle
responds when the vehicle is locked
with the RKE transmitter.

Touch Off, Lights and Horn, Lights
Only, or Horn Only.

Remote Door Unlock

This setting specifies whether all
doors, or just the driver door, unlock
when pressing

on the RKE

transmitter.

Touch All Doors or Driver Door.

Remote Start Auto Heat Seats

This setting automatically turns on
the heated seats when using the
remote start function on cold days.
See

Heated Front Seats

and

Remote Vehicle Start

If equipped with Auto Heated Steering
Wheel, this feature will turn on when
the Remote Start Auto Heated Seats
turn on.

Touch Off or On.

Remote Window Operation

If equipped, this feature enables
remote operation of the windows with
the RKE transmitter. See

Remote

Keyless Entry (RKE) System Operation

Touch Off or On.

Passive Door Unlock

This setting specifies which doors
unlock when using the button on the
driver door handle to unlock the
vehicle.

Touch All Doors or Driver Door Only.

Summary of Contents for ATS 2018








































































































































































































































































































































































































Search results

Summary of Contents for ATS 2018

Reviews:

Related manuals for ATS 2018

Brands by name

Popular brands

Cadillac ATS 2018, Owner'S Manual

Search results

Summary of Contents for ATS 2018

Reviews:

Related manuals for ATS 2018

Brands by name

Popular brands