Cadillac ATS 2018 Owner'S Manual Download Page 9

Page: 9 / 391

Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

11349135) - 2018 - crc - 5/1/17

IN BRIEF

Air Vents

170

Exterior Lamp Controls

148

Turn Signal Lever. See

Turn and

Lane-Change Signals

152

3. Tap Shift Controls (If Equipped).

See

Adaptive Cruise Control

220

(If

Equipped).

Forward Collision Alert (FCA)
System

232

(If Equipped).

Heated Steering Wheel

109

(If

Equipped).

Traction Control/Electronic
Stability Control

208

(ATS-V).

Steering Wheel Controls

109

Instrument Cluster

117

Driver Information Center (DIC)
Display. See

Driver Information

Center (DIC)

132

Steering Wheel Controls

109

(If

Equipped).

Windshield Wiper/Washer

9. Light Sensor. See

10.

Dual Automatic Climate Control
System (Uplevel)

166

Dual

Automatic Climate Control System
(Base)

162

11.

Hazard Warning Flashers

151

12.

Heated Front Seats

(If

Equipped).

13.

Instrument Panel Storage

105

(If

Equipped).

Wireless Charging Pad (If
Equipped) (Out of View). See

Wireless Charging

113

14.

Traction Control/Electronic
Stability Control

208

(ATS).

Stop/Start Disable Switch (If
Equipped). See

Starting the

Engine

191

Electric Parking Brake (If
Equipped, Manual Transmission).
See

Parking Brake (Electric)

205

Parking Brake (Manual)

207

MODE Button (ATS Only) or

Button (ATS-V Only). See

Driver Mode Control

210

15. Shift Lever.

See

Automatic Transmission

198

Manual Transmission

201

(If

Equipped).

16. Storage Bin. See

Instrument Panel

Storage

105

17. ENGINE START/STOP Button.

See

18.

19.

Steering Wheel Adjustment

109

20.

Head-Up Display (HUD)

135

(If

Equipped).

21. Parking Assist Button. See

Driver

Assistance Systems

227

Lane Keep Assist (LKA)

238

(If

Equipped).

22. Electric Parking Brake (If

Equipped, Automatic
Transmission).
See

Parking Brake (Electric)

205

Parking Brake (Manual)

207

23. Data Link Connector (DLC) (Out

of View). See

Malfunction

Indicator Lamp (Check Engine
Light)

124

Summary of Contents for ATS 2018








































































































































































































































































































































































































Search results

Summary of Contents for ATS 2018

Reviews:

Related manuals for ATS 2018

Brands by name

Popular brands

Cadillac ATS 2018, Owner'S Manual

Search results

Summary of Contents for ATS 2018

Reviews:

Related manuals for ATS 2018

Brands by name

Popular brands