Cadillac ATS 2018 Owner'S Manual Download Page 34 | Manualshive

Page: 34 / 391

background image

Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

11349135) - 2018 - crc - 5/1/17

32

KEYS, DOORS, AND WINDOWS

With Remote Start Shown, Without

Similar

Q

:

Press to lock all doors and if

equipped, the fuel door. The turn
signal indicators may flash and/or the
horn may sound on the second press
to indicate locking. See

Personalization

If the driver door is open when

Q

is

pressed and enabled through vehicle
personalization, all doors will lock and
then the driver door will immediately
unlock. See

Vehicle Personalization

. If a passenger door is open

when

Q

is pressed, all doors lock.

Pressing

Q

may also arm the alarm

system. See

Vehicle Alarm System

If equipped with auto mirror folding,
pressing and holding

Q

for

one second will fold the mirrors. The
auto mirror folding feature will not
operate unless it is enabled. See

Vehicle Personalization

K

:

Press to unlock the driver door.

Press unlock again within five seconds
to unlock all doors. The RKE
transmitter can be programmed to
unlock all doors on the first button
press. See

Vehicle Personalization

When remotely unlocking the vehicle
at night, the headlamps and back-up
lamps will come on for about
30 seconds to light your approach to
the vehicle. The turn signal indicators
may flash to indicate unlocking.

See

Vehicle Personalization

Pressing

K

will disarm the alarm

system. See

Vehicle Alarm System

Press and hold

K

until the windows

fully open. Windows will not operate
unless remote window operation is
enabled. See

Vehicle Personalization

If equipped, pressing

K

will also

unlock the fuel door.

/

:

If equipped, press and release

Q

and then immediately press and hold

/

for at least four seconds to start

the engine from outside the vehicle
using the RKE transmitter. See

Vehicle Start

7

:

Press and release to initiate

vehicle locator. The exterior lamps
flash and the horn chirps three times.
Press and hold

7

for three seconds to

sound the panic alarm. The horn
sounds and the turn signal lamps
flash for 30 seconds, or until

7

is

pressed again or the vehicle is started.

X

:

Press twice quickly to release the

trunk.

«
...
32
33
34
35
36
...
»

Summary of Contents for ATS 2018








































































































































































































































































































































































































Reviews:

No comments

Related manuals for ATS 2018

Brand: Harbor Freight Tools Pages: 4

Brand: Mazda Pages: 527

2008 Escalade EXT

Brand: Cadillac Pages: 496

Chevrolet Silverado 2500HD 2021

Brand: GMC Pages: 433

PRIME DESIGN VRR-E-PM21

Brand: Safe Fleet Pages: 12

Brand: Whispbar Pages: 17

Brand: Meta System Pages: 16

Brand: ACV Pages: 2

Brand: Billien Pages: 2

Brand: Lexus Pages: 28

Brand: SAFARI Pages: 5

Brand: Rugged Ridge Pages: 5

Brand: ULTIMATE SPEED Pages: 56

Brand: Belkin Pages: 30

Brand: Mitsubishi Pages: 141

Brand: Buick Pages: 58

Brand: Subaru Pages: 399

Brand: Conrad Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands