Cadillac ATS 2018 Owner'S Manual Download Page 201 | Manualshive

Page: 201 / 391

background image

Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

11349135) - 2018 - crc - 5/8/17

DRIVING AND OPERATING

199

{

Warning

Shifting into a drive gear while the
engine is running at high speed is
dangerous. Unless your foot is
firmly on the brake pedal, the
vehicle could move very rapidly.
You could lose control and hit
people or objects. Do not shift into
a drive gear while the engine is
running at high speed.

Caution

Shifting out of P (Park) or
N (Neutral) with the engine running
at high speed may damage the
transmission. The repairs would not
be covered by the vehicle warranty.
Be sure the engine is not running at
high speed when shifting the
vehicle.

Caution

A transmission hot message may
display if the automatic
transmission fluid is too hot.
Driving under this condition can
damage the vehicle. Stop and idle
the engine to cool the automatic
transmission fluid. This message
clears when the transmission fluid
has cooled sufficiently.

D :

This position is for normal driving.

If more power is needed for passing,
press the accelerator pedal down.

Downshifting the transmission in
slippery road conditions could result
in skidding; see

“

Skidding

”

under

.

Caution

Spinning the tires or holding the
vehicle in one place on a hill using
only the accelerator pedal may
damage the transmission. The
repair will not be covered by the

(Continued)

Caution (Continued)

vehicle warranty. If the vehicle is
stuck, do not spin the tires. When
stopping on a hill, use the brakes to
hold the vehicle in place.

While in Sport or Track Mode, the
vehicle monitors driving behavior, and
automatically enables Performance
Shift Features when spirited driving is
detected. These features maintain
lower transmission gears to increase
available engine braking and improve
acceleration response. The vehicle will
exit these features and return to
normal operation after a short period
when no spirited driving is detected.
See

Driver Mode Control

The transmission will shift down a
gear to help hold vehicle speed and
reduce brake wear when:

.

Driving on a steep descent.

.

The shift lever is in D (Drive).

.

Frequent braking is required.

«
...
199
200
201
202
203
...
»

Summary of Contents for ATS 2018








































































































































































































































































































































































































Reviews:

No comments

Related manuals for ATS 2018

Brand: JAC Pages: 70

Brand: Hama Pages: 6

Brand: Vauxhall Pages: 199

Brand: Yakima Pages: 12

Brand: JEHNERT SOUND DESIGN Pages: 8

Experience Series

Brand: Rainbow Pages: 19

Brand: Yakima Pages: 12

Brand: Calix Pages: 5

Camaro 12000 1968 Series

Brand: Chevrolet Pages: 455

Brand: Chariot Carriers Pages: 3

Brand: EEZ RV Pages: 31

Brand: Chevrolet Pages: 2

Brand: hc-cargo Pages: 60

Brand: RAM Pages: 76

Brand: Advantech Pages: 59

Brand: XTC Pages: 4

Brand: Webasto Pages: 34

Brand: Honda Pages: 268

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands