Cadex C8000, User Manual

Page: 289 / 300

C8000 Battery Testing System User Manual
5
Status Messages
277
210 BAD WAVEFORM THE REQUESTED WAVEFORM EXCEEDS EITHER THE
SYSTEM MAXIMUM LIMITS OR IS GREATER THAN THE
BATTERY LIMIT AS DEFINED IN THE C-CODE
211 WATTS > MAX THE REQUESTED POWER (WATTAGE) IS GREATER THAN
THE SYSTEM MAXIMUM OF 100W (CHARGE) / 80W
(DISCHARGE)
212 WAVEFORM FAULT ONLY ONE SUB-MILLISECOND WAVEFORM ALLOWED PER
CHANNEL PAIR
215 LOW_OFFSET_ERROR THE AUTOMATED CALIBRATION FOR THE LOAD CAPTURE
UNIT IS OUT OF RANGE
218 LCU_CHANNEL_1_ONLY LOAD CAPTURE DEVICE IS SUPPORTED ON CHANNEL 1
ONLY
219 LCU_CAPTURING LOAD CAPTURE UNIT IS CAPTURING DATA
220 LOOP CNT TEST LOOP COUNTER TEST
221 VOLTAGE TEST VOLTAGE TEST
222 CURRENT TEST CURRENT TEST
223 TEMP. TEST TEMPERATURE TEST
224 DELTA-T TEST DELTA-TEMPERATURE TEST TEMPERATURE TEST
225 IMPED. TEST IMPEDANCE/RESISTANCE TEST
226 ERROR CODE TEST ERROR CODE TEST
227 VARIABLE TEST VARIABLE TEST
228 VARIABLE DIFF VARIABLE DIFFERENCE TEST
229 AUX. PORT TEST AUX. PORT TEST
230 AUX. DIFF TEST AUX. DIFFERENCE TEST
231 LCU_REVERSED LOAD CAPTURE DEVICE IS DETECTING A REVERSE
CURRENT FLOW
232 LCU_CALIBRATING LOAD CAPTURE UNIT IS BEING CALIBRATED
233 TEMPERATURE OF
RANGE TEMPERATURE IS OUT-OF-MEASURABLE RANGE
234 PARALLEL CHANNEL IS IN PARALLEL MODE
236 NO PRIMARY CHG NO CHARGE ALLOWED ON PRIMARY CELLS
255 OFFLINE
DSP CONTROLLER IS “OFFLINE”