C8000 Battery Testing System User Manual
16
2.1.4.6
Battery Port Connections
There are four port connections, to attach up to four battery
adapters.
Each channel has a battery port, an auxiliary input/output, and a
circuit breaker.
Each Battery Port is used to plug
a Power Port Cable and I/O Port
is used for secondary
measurements and control. A
C8000 Adapter Unit use both
ports for the SnapLock
TM
/Rigidarm
TM
series adapters For
more information about the
SnapLock Adapter, see
SnapLockTM Universal Battery
Adapter (4-wire versions only)
If the plastic button on a circuit
breaker pops out, the breaker has
tripped. Determine and correct
the condition that caused the
breaker to trip.
Allow the breaker to cool for 15
minutes before pushing in the
button to reset the breaker.
A battery adapter may not always be available.
In most cases, the channel cable will terminate with
positive/negative wires and have a magnetic temperature probe
to attach to the battery.
If the breaker button does not stay in when you push it, allow
more time for the breaker to cool. (The breaker does not
automatically reset.)
Summary of Contents for C8000
Page 12: ......
