Cadex C4000 SERIES, User Manual

Page: 27 / 152

Program in progress
Program completed
Test results negative.
Status Indicators
Introduction
1. LED Indicators
The light-emitting diode (LED) provides the user with a
quick overview of the battery test results. The battery
status is indicated for each Station by the LEOs as
follows:
RUN (yellow)
READY (green)
FAIL (red)
Detailed battery test results are shown on the 80-
character display.
•
RUN
steady Battery service in progress.
blinking"
Below temperature range for charge; will proceed
automatically when temperature rises to acceptable
level.
READY
steady Battery ready; capacity not available or capacity
compared to target setting
blinking
Battery ready; CHARGE mode only.
•
FAIL
steady
Program completed; Target Capacity not met.
blinking
Battery voltage fault; cannot be corrected.
POWER
steady
Analyzer operational; normal condition.
blinking
Analyzer is on hold because its internal temperature is
above operating range; resumes when normal.
•
Temperature trigger point: 70°C (158°F) .
• Minimum hold time: 1 minute .
READY
blinking"
Battery hot; program terminated (CHARGE program
and FAIL
only).
MENU
steady
Menu mode. Batteries in service are not disrupted by
the menu but resume service as usual.
" with temperature sensor option only
4-2
•