Cadex C4000 SERIES, User Manual

Page: 75 / 152

Custom Programs
Limitation
To change the Center
Switch Position
Only one Custom Program configuration can be stored
at any time within the analyzer. The program may be
assigned to any or all Stations. It is not possible to
assign various Custom Programs to different Stations.
Press Menu, select Station, scroll (Key 1 or 2) to
UTILITIES, enter, scroll to CENTER SWITCH
POSITION and enter. The display reads:
Press Key 1 (or 2) to alter setting from CHARGE to
CUSTOM. Press Key 3 to save.
The Center Switch Position on the selected Station
has now been changed from CHARGE to CUSTOM.
To verify, move the appropriate Program Selector
Switch to the center position. Press the appropriate
Display Key while in EMPTY. Press the same key
several times until the display reads:
Il:;ljllll;.lltgl~III.::
:'elllgM~;p.itim::::iiMllli::
Example only
Changing the Program Selector Switch setting will
indicate the selected program on the display.
•
•
With OPTION-P
If your unit is equipped with OPTION-P, the information
will be retained when the power is turned off.
Without OPTION-P
If your unit is not equipped with OPTION-P, the
code information will be lost when the C4000 is
turned off.
If the unit is turned off with the Station on EMPTY (no
test battery), the Custom Program Code resets to
CHARGE.
If the unit is turned off with a battery in service, the
Custom Code reverts to a HOLD condition. While on
hold, neither charge nor discharge is applied to the test
battery.
9-4
•