Cadex C4000 SERIES, User Manual

Page: 63 / 152

•
•
•
Programming Battery Adapters
Example
2 Change battery type, cell count, -current rating and
C-Rate to:
• NiCd of 6 cells (7.5V) 4000mAh, C-Rate of 0.33;
C-Code
11-06-160 :3333-06-500-3646.
Repeat the keystroke procedure listed at the beginning
of this section to enter the MODIFY BATTERY CODE
menu option. Now, modify the Basic C-Code to
11-06-160.
Note Battery type 11 is chosen to allow selecting the C-
Rate of 0.33C. If 0.5C is used, for example, the battery
type can remain 10 (refer to CHAPTER 11, "1. Battery
Type").
At this point the parameters for the Basic C-Code are
completed and the display should read as follows:
Now, change the C-Rate from the default value of 1C to
0.33C. The C-Rate is part of the Extended C-Code.
Press
1
or
2 to CONTINUE (entering Extended C-Code)
Press
1
or
2 to modify CH & DCH C-RATE (charge & discharge C-Rate)
Press
1
or
2
then
3
to modify charge/discharge C-Rate from 1010 to 3333
Repeat this procedure until all changes are made and
the display reads:
__ iiiiii
Key 3 saves all changes; Key 4 moves back to a
previous setting; the Menu Key exits without changes.
Note Default settings of the Extended C-Code are
marked with (*) on identification message .
7-11