Cadex C4000 SERIES, User Manual

Page: 79 / 152

Custom Programs
3. Code Definition
The Custom Program is divided into four Phases and
one Exit Phase. Each Phase can be programmed
independently.
The complete Custom Code is as
follows:
•
CCTG -
I I
Phase 1
?
CT
9 -
Phase 2
CCTG -
L-J
Phase 3
5-
Phase 4
cr1
Exit
Phase
Each Phase consists of:
The Exit Phase
consists of:
Cycle 1 and Cycle 2
C
=
Cycle (two identical cycles per Phase)
T
=
Test
G
=
Go-To
C
=
Exit Cycle (identical to "C" in other Phases)
R
=
Ready
We are now examining the function of a Phase
consisting of "Cycle 1 and Cycle 2", "Test" and "Go-To".
Cycle 1 and Cycle 2 at the beginning of each Phase
perform the actual service. To skip and go to the next
Cycle, enter O. To apply a service, enter a number as
per Table 9.1.
CYCLE 1 CYCLE 2
0
No cycle
No cycle
1 Discharge Discharge
2
Fast-charge Fast-charge
3 Recondition
Recondition
4
Trickle charge Trickle charge
5-9 Invalid Cycle Invalid Cycle
Table 9.1
Example
By entering "2100" (charge-discharge-skip-
skip), the battery is first fully charged, then discharged
to the end-of-discharge
threshold. "00" skips Test and
Go-To and advances to Phase 2.
9-8
•
•