Cadex C4000 SERIES, User Manual

Page: 12 / 152

•
Basic Operation
2. Analyzing Batteries
Set Program
Before servicing a battery, select the desired program
(refer to CHAPTER 3 -
PROGRAMS & TARGET
CAPACITY).
Set Target Capacity
Select the Target Capacity. If you are not certain what
setting to use, select 80%. For more detail. refer to
CHAPTER 3 - PROGRAMS & TARGET CAPACITY.
Verify correct battery
setting
Check that the Battery Adapter is set to the correct
battery parameters.
With the display indicating EMPTY,
press the appropriate Display Key. The display now
indicates the setting of the Battery Adapter in question.
STATIQII 4
ZOfE 2
VQ.TAGE
Battery rating
STATION 3
STATION 2
Battery voltage
NiCd (STD.); AUTO-SCALED
12 CELLS (15.00V); 4000 mAh
Z0fE1
EN) OF DISCHARGE
SHORT
#2
1
2
3
4
EN) OF
Number of cells
C4000 Battery Parameter Display For A NiCd Battery
Station number
STAros
VQ.TACE
•
Figure 2.1
Viewing different
display frames
Since not all information can be shown on one display
frame, the battery parameters are contained in several
frames. The basic information is shown in the first
frame. followed by more detailed definitions
in the
subsequent frames.
To step through the frames, press the appropriate
Display Key several times. For more details on the
display, refer to CHAPTER 4 - STATUS INDICATORS.
•
Reverse polarity and
short protection
The C4000 is electronically protected against reverse
connection and short circuits. No harm is done to the
equipment if the battery has a short or is accidentally
connected in reverse polarity .
2-3