Cadel AQUOS3 16, Installer Manual

Page: 21 / 56

21
IDROSTUFE A PELLET
Fig. 48 - 2° Slot Fig. 49 - 3° Slot Fig. 50 - 4° Slot
5.10 ASSEMBLING AQUOS SIDE PANELS
3
16-23-23 H
2
O
To assemble the side panels, proceed as follows:
Fig. 51 - Remove the cover Fig. 52 - Remove the compensator Fig. 53 - Put in the finish
• Unscrew the screws on the cover and remove it (see Fig. 51 ).
• Remove the compensator from the side (see Fig. 52 ).
• Put in the painted / ceramic / stone panels, sliding them down the guides (see Fig. 53 ).
Fig. 54 - Bend the supports Fig. 55 - Position the compensator Fig. 56 - Fasten the compensator
• When you put in the finishes, bend the supports slightly to make up for any looseness in the metal/ceramic/stone panel. These
supports are grooved along the guides (see Fig. 54 ).
• Reposition the compensator on the side (see
Fig. 55
).
• Secure the compensator (see Fig. 56 ) and reposition the cover with the screws.