Cadel AQUOS3 16 Installer Manual Download

Page: 24 / 56

IDROSTUFE A PELLET

6.3

TOP OUTLET CONNECTION MAYA 3

• insert the linear pipe “B” (not supplied) into the inlet “r” on the stove

• secure the pipe “B” to the stove using the hook “C” and screw “z”

Fig. 64 - Top outlet

PLUMBING CONNECTION

7.1

PLUMBING SYSTEM CONNECTION

IMPORTANT!

If installation of the product involves interaction with another, pre-existing system complete with heating

equipment (gas boiler, methane boiler, diesel boiler, etc.), contact qualified personnel, who subsequently will

be responsible for conformity of the system in compliance with the applicable law in force.

The Company declines all responsibility for damage to persons or things in the event of failed or incorrect

operation, if the aforementioned warnings are not complied with.

IMPORTANT!

WE STRONGLY RECOMMEND WASHING THE ENTIRE SYSTEM BEFORE CONNECTING THE STOVE IN ORDER TO RE-

MOVE RESIDUE AND BUILD-UPS.

Always install gate valves upstream of the stove to isolate it from the hydraulic system should it be necessary

to move it for routine and/or special maintenance. Connect the stove using flexible hoses so as not to excessi-

vely bind the stove to the system and to allow it to be moved slightly.

The pressure discharge valve must always be connected to a water discharge pipe. The pipe must be suitable

to withstand the high water temperature and pressure.

Summary of Contents for AQUOS3 16

























































Search results

Summary of Contents for AQUOS3 16

Reviews:

Related manuals for AQUOS3 16

Brands by name

Popular brands

Cadel AQUOS3 16, Installer Manual

Search results

Summary of Contents for AQUOS3 16

Reviews:

Related manuals for AQUOS3 16

Brands by name

Popular brands