Cabletron Systems BRIM-A6DP User Manual Download Page 11 | Manualshive

Page: 11 / 66

background image

BRIM-A6DP Overview

BRIM-A6DP User’s Guide

1-3

1.3

BRIM-A6DP OVERVIEW

The BRIM-A6DP extends the functionality of your Cabletron Systems
MIM or standalone hub to include remote bridging/routing capability. It
allows remote connectivity using ATM technology.

Using two APIMs on the front panel of the BRIM-A6DP, Cabletron
Systems can offer redundant ATM links from the BRIM to a switched
ATM network. Cabletron Systems provides a variety of APIMs that let
you select the configuration of your choice. If port redundancy is not a
requirement, then only one APIM may be installed.

The BRIM-A6DP supports two types of Virtual Channels: Permanent
Virtual Channels (PVCs), and Switched Virtual Channels (SVCs). It also
supports the ATM Forum’s User-Network-Interface (UNI) for SVC
signaling, and FORE Systems’ Simple Protocol for ATM Network
Signaling (SPANS).The BRIM-A6DP allows the user to create LAN
Emulation Clients (LECs), and Virtual LANs (VLANs). Refer to Chapter
3,

Local Management

, for information on BRIM-A6DP Local

Management features.

1.4

BRIM-A6DP FEATURES

ATM Port Interface Modules (APIMs)

The BRIM-A6DP supports two Cabletron Systems APIMs for ATM
connectivity and redundancy. You can easily install APIMs into the BRIM
for the interface of your choice.

APIMs support multiple types of physical layer cable types and are fully
compliant with all ATM Forum specifications.

MIB Support

For additional information on how to extract and compile individual
MIBs, refer to the Release Notes, or contact Cabletron Systems Technical
Support (refer to Section 1.7,

Getting Help

).

LANVIEW Diagnostic LEDs

Cabletron Systems provides a visual diagnostic and monitoring system
called LANVIEW. The BRIM-A6DP LANVIEW LEDs help you quickly
identify bridge and link status.

«
...
9
10
11
12
13
...
»

Summary of Contents for BRIM-A6DP



































































Reviews:

No comments

Related manuals for BRIM-A6DP

Brocade X6-8 Director

Brand: Broadcom Pages: 207

Brand: Juniper Pages: 190

Brand: APM Pages: 3

Brand: Patton electronics Pages: 23

OCTOPUS 5TX-EEC

Brand: Hirschmann Pages: 6

ION 1200 Series

Brand: PaloAlto Networks Pages: 90

Brand: peplink Pages: 2

Brand: E-TOP Pages: 24

Brand: Intellinet Pages: 12

Brand: Kramer Pages: 2

Brand: Dahua Pages: 113

Brand: Razer Pages: 17

Brand: Topcom Pages: 16

Brand: ADDON Pages: 4

Brand: TP-Link Pages: 16

Brand: Echo Pages: 21

Brand: M-system Pages: 4

Brand: Kramer Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands