Cabletron Systems BRIM-A6DP, User Manual

Page: 34 / 66

Chapter 3: Local Management
3-12 BRIM-A6DP User’s Guide
3.6.1 LEC Administration Screen Fields
The LEC Administration allows the user to add, modify, or delete LAN
Emulation Clients (LECs). New LECs can be customized by the user, or
the new LEC can be created using default settings which are stored by the
BRIM-A6DP.
The following list explains each of the LEC Administration screen fields
and commands:
LEC Index
This field is used to identify this LEC in the ATM Forum’s LEC MIB. By
default, a single LEC will be automatically configured on the first
available LEC Index by the BRIM-A6DP when the host device is first
powered up. The range of available LEC Indices is dependent on the type
of host device the BRIM-A6DP resides in. Refer to Table 3-2 for a listing
of the available LEC Indices for the Cabletron Systems products the
BRIM-A6DP may be installed in.
To create additional LECs, this field must be used to increment the LEC
Index count.
Configure ELAN
This field allows the user to configure a new LEC manually, or have the
LEC configured automatically. This field toggles between [Automatic]
and [Manual]. For instructions on how to configure a new LEC
automatically or manually refer to Section 3.6.2.
Table 3-2 BRIM-A6DP LEC Indices
BRIM-A6DP Host Product Available LEC Indices
EMM-E6 5 through 20
ESXMIM 7 through 22
ESX-1320/ESX-1380 13 through 28
MicroMMAC 2 through 14
NBR-420 4 through 19
NBR-620 6 through 21