Cabletron Systems BRIM-A6DP, User Manual

Page: 45 / 66

The VLAN Assignment Screen
BRIM-A6DP User’s Guide 3-23
Port
This field represents the port number of the front panel Ethernet port. The
last port number in this field represents the ELAN.
State
This field is used to designate which ports will be assigned to the VLAN
that is currently in the VLAN Name field. This field toggles between
[Assigned] and [Unassigned]. For more information on the guidelines
concerning the assignment of ports to VLANs, refer to Section 3.10.1.
ADD/MODIFY
This command saves all changes to memory.
DELETE
This command deletes the VLAN that is displayed in the VLAN Name
field.
ADD ROUTER MAC
This command opens the Add Router MAC screen. The Add Router MAC
screen is used to enter the MAC address of the router being used to
provide inter-ELAN communication. The Add Router MAC screen is also
used to enter the MAC addresses of end users that belong to more than
one VLAN/ELAN pair.
RETURN
This command opens the previous Local Management Screen.
NOTE
The MAC address of the router only needs to be added for
routers that use a single MAC address for all ELANs. If the
router uses a separate MAC address for each ELAN then the
Add Router MAC screen function is not necessary.