Chapter 3: Local Management
3-20
BRIM-A6DP User’s Guide
LEC ATM Address
This field allows the user to enter a base ATM Address for the
BRIM-A6DP. If ILMI is enabled, the BRIM-A6DP ATM Address is
automatically configured.
SAVE
This command saves all changes to memory.
RETURN
This command opens the previous Local Management screen.
3.8.2
Setting the SVC Signalling and LAN Emulation
Type
To set the Signalling and LAN Emulation Type, perform the following
steps:
1. Use the arrow keys to highlight the Signalling/LAN Emulation Type
field.
2. Press the SPACE bar until the desired Signalling and LAN Emulation
type displays.
3. Use the arrow keys to highlight the SAVE command at the bottom of
the screen,.
4. Press ENTER. The changes are saved to memory.
3.8.3
Enabling and Disabling the ILMI
To enable or diable the ILMI, perform the following steps.
1. Use the arrow keys to highlight the ILMI field.
2. Press the SPACE bar to toggle between [ON] and [OFF] until the
desired mode displays.
3. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
4. Press ENTER. The changes are saved to memory.
Summary of Contents for BRIM-A6DP
