Chapter 3: Local Management
3-32
BRIM-A6DP User’s Guide
PREV
This command displays the previous six MAC addresses of the STATIC
MAC ENTRIES field. To use this command, use the arrow keys to
highlight the PREV command and press ENTER. The previous series of
MAC addresses displays.
RETURN
This command opens the previous Local management screen.
3.12.2
Adding MAC Entries
To add a MAC address, perform the following steps:
1. Use the arrow keys to highlight the Add/Delete field.
2. Enter the MAC Address. The MAC address must be entered using a
dash (-) between every two characters (i.e., 00-00-1D-12-34-56).
3. Use the arrow keys to highlight the ADD command at the bottom of
the screen.
4. Press ENTER. The changes are saved to memory.
3.12.3
Deleting MAC Entries
To delete a MAC address, perform the following steps:
1. Use the arrow keys to highlight the Add/Delete field.
2. Enter the MAC Address that will be deleted. The MAC address must
be entered using a dash (-) between every two characters
(i.e., 00-00-1D-12-34-56).
3. Use the arrow keys top highlight the DELETE command at the
bottom of the screen.
4. Press ENTER. The MAC Address is deleted.
Summary of Contents for BRIM-A6DP
