CAB THARO Apollo Series, Operator'S Manual

Page: 86 / 139

86 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
Safety Instructions
CAUTION !
The printer must be powered OFF before mounting the rewinder.
During operation, the rotating axle is openly accessible !
Therefore, keep long hair, loose clothes, and jewelry away from the
moving parts !
Before connecting the rewinder to the power supply, make sure the
voltage selected on the power module corresponds with the supply
voltage !
Set the switch (1) to the required method of rewinding :
- Rewind with labels on the inner side of the silicon liner
- Rewind with labels on the outer side of the silicon liner
Selecting the Method of Rewinding
The external rewinder allows rewinding of labels in both ways, inside and
outside winding.
1
Fig. 13 b Selecting the method of rewinding