CAB THARO Apollo Series, Operator'S Manual

Page: 42 / 139

42 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
ONL key Switch into OFFLINE mode. (LED ONL off)
FF key Provides label feed. The leading edge of the next label to be
printed is in print position.
CAN key Deletes data of the previous print job in internal memory.
Following that, "Pause reprint" is not available.
(see PSE key)
PSE key Repeats the print of the last label, after the previous print job has
been completed.
(only when setup parameter "Pause reprint" is on)
ONL key Pressing both keys together for at least 5 seconds will switch
into the SETUP mode.
+ (LED ONL off)
CAN key
System Mode ONLINE
The printer is switched ON and ready to receive data.
Display
The top line of the display shows "ONLINE".
The bottom line of the display shows the time of day.
During the transfer of data, a rotating pointer appears in the right hand corner
of the bottom line of the display.
When saving data on the PC card, a filled rectangle appears in the right hand
corner of the bottom line of the display.
LED Display
LED ONL on.
Function Keys
Table 8 a Key functions in ONLINE mode