CAB THARO Apollo Series, Operator'S Manual

Page: 120 / 139

B-4 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
Pin Assignment of the Parallel Interface Connector
The Apollo provides a 36 pin connector for the parallel Centronics interface.
Table B-2 Signals of the Centronics interface
Fig. B-6 Centronics interface connector (rear of the printer)
Pin Signal Pin Signal
1 /STROBE 19 GND
2 DATA 1 20 GND
3 DATA 2 21 GND
4 DATA 3 22 GND
5 DATA 4 23 GND
6 DATA 5 24 GND
7 DATA 6 25 GND
8 DATA 7 26 GND
9 DATA 8 27 GND
10 /ACKNLG 28 GND
11 BUSY 29 GND
12 PE 30 GND
13 SLCT 31 nc
14 nc 32 nc
15 nc 33 nc
16 GND 34 nc
17 nc 35 nc
18 nc 36 nc
Pin 18 Pin 1
Pin 19 Pin 36