CAB THARO Apollo Series, Operator'S Manual

Page: 73 / 139

73 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
Tear-off Position
If the "Tear-off position" is active, an additional feed forwards will take place
after completion of the print job. This makes it possible to cut off the last label
at the tear-off plate. After starting a new print job, first the label material will be
fed back until the front edge of the first label is located at the print line.
If the parameter is OFF, the label dispense stops immediately after the last
label has completely passed the print line.
Default Setting : Tear-off position OFF
Tear-off positio
On
Tear-off positio
xxx
Yes
Tear-off positio
xxx
No
Selection
Confirmation
Fig. 9 s Set "Tear-off position" parameter
16 Debug mode
17 Tear-off positio
18 Pause reprint
Tear-off positio
Off