BYD F6, Owner'S Manual

Page: 83 / 215

F6 OWNER’S MANUAL
80
The frequency will be lost if the battery is
discharged or disconnected, or the radio
fuse is taken out.
Hold SCAN—Press the AUTO SELECT for
2 seconds, the system will search the station
and store it on FM1
、 FM2 、 FM3 or AM1 、
AM2. To activate it, Press the SCAN button
of the AUTO SELECT. Then the SCAN is
displayed and flashed. The preset (1
～ 6)
can store 12 stations on AM and 18 stations
on FM, then use the preset (1
～ 6) to choose
the station.
If you don’t like the frequency AUTO
SELECT has stored, you can store other
frequency on the preset bars. Use the
TUNE
、 SEEK or SCAN function searches
desired frequency, according to the above ,
store the frequency to preset bars
Audio adjustment
The BAS
、
TRE
、
BAL and FAD can be
adjusted.
Press AUDIO, choose the desired mode.
Press the AUDIO every time
， the mode can
change from the BAS to TRE to BAL to
FAD
， then return to the chosen mode.
Changing the mode, the related mode name
will be displayed.
Volume balance(L-R/F-R)— these two
modes adjust the strength of the sound
coming from each speaker. BALANCE
adjust the left to right strength while the
FADER adjust the front to rear strength.
Press AUDIO
， choose the BALANCE OR
FADER mode. Rotate the volume knob, the
BALANCE OR FADER can be adjusted to
desired degree. The displayed number is the
current set. Display the C, when the volume
reaches to the center of range.
Alt/Bass—Use these modes to choose the
desired tone. Press AUDIO
， choose TRE
or BAS mode. Rotate volume knob to
desired mode. The displayed number is the
current set.
Display the O when volume reaches to the
center of range. Several seconds after you
stopping to use the volume knob, the system
will automatically return to and display the
chosen mode.
Electronic clock
The radio system usually display the time
when the ignition switch is on the
ACCESSORY or ON.
T
o enact time, press AUDIO （ CLOCK ） for
2 second, after listening to reminding sound,
enter into the adjusting mode. Then hold
the H
（ preset ing 4 until the hour increase to
the desired hour ； hold M （ presetting 5 ）
until the minute increase to desired minute.
Use the R
（ presetting 6 ） ， enact the time to
the nearest current time quickly. At the
clock adjusting mode, press the R. If the
time is the former half hour, press R to enact
the time always to former one hour... If the
time is rear half hour, press R to enact the
time to the beginning of next hour.
For example
：
1:06 will be enacted to 1:00
1:30 will be enacted to 2:00
1:52 will be enacted to 2:00