BYD F6, Owner'S Manual

Page: 177 / 215

F6 OWNER’S MANUAL
174
Cere care
Cering must be made after washing and
drying the vehicle. For preventing the body
appearance from accumulating water,
should cere the body and aglet. After
cereing, the accumulating water will
become the drip or bead.
You should use the high quality liquid cere
or mushy cere. When using, you should
refer to the specfiction of container. There
are following two kinds of products
：
Protection cere—— coated on the paint to
protect it from sun shining and air polluting.
Should coat this cere on the new vehicle.
Polishing cere——it is the mixture of
polishing cere and cleanser or paraffin that
make the paint that is oxidized or lose
polish anew give off reflect. Generally
speaking, the cere includes soft rubbing
powder and solvent, it can remove the
surface layer of paint. If it can’t make the
paint resume original reflect after cering the
protection cere, should coat the polishing
cere.
With cleanser removing the ordure such as
pitch and insect etc will cause dropping cere.
Notice: Even if the other parts needn’t cere,
must anew cere on the parts which drop cere
Alloy wheel
When cleaning other exterior parts,
meanwhile you should clean the alloy wheel.
After cleaning them with the same solution,
wash them thoroughly.
There is a transparent protective layer to
avoid aluminum eroding and rusting. The
bad chemicals or hard brush will hurt the
protective layer. Only use the neuter
cleanser and soft brush or sponge to wash
wheel