BYD F6 Owner'S Manual Download Page 136

Page: 136 / 215

F6 OWNER’S MANUAL

133

Transmission oil
Automatic transmission

Check the oil level with the engine at
normal operation temperature.

．

Drive the vehicle till the oil temperature

is reaching the usual temperature
(70~80 ).

℃

．

Park the vehicle on level ground.

．

Change the shift lever to every position,

make the oil inject into torque converter and
hydraulic circuit, and then put the lever at N
position, keep engine in normal idle speed,
and must apply the park braking.
4

．

Remove the dipstick (yellow loop) from

the transmission, and wipe it with a clean
cloth.

COLD upper and lower marks

HOT upper and lower marks

．

Insert the dipstick all the way into the

transmission.
6

．

Remove the dipstick and check the fluid

level. 7

．

If the oil level is below the lower

mark, remove the filler plug and add oil into
the tube to make the level between upper
and lower marks of HOT.

Summary of Contents for F6
























































































































































































































Search results

Summary of Contents for F6

Reviews:

Related manuals for F6

Brands by name

Popular brands

BYD F6, Owner'S Manual

Search results

Summary of Contents for F6

Reviews:

Related manuals for F6

Brands by name

Popular brands