BYD F6, Owner'S Manual

Page: 60 / 215

F6 OWNER’S MANUAL
57
When heating, the HI or LO indicator will
be always bright until you press the
opposite side of the switch to close the
heating.
In HI, turns off the heater when the seat gets
warm; and turn back on after the seat
temperature drops. If only in HI, this will
continue. The HI indicator also will be
bright to remind you the heating device is in
HI.
In LO, the heating device will continue to
heat, and don’t change with the temperature.
Follow these precaution whenever you use
the seat heaters
：
1
．
Use the heat setting only to heat the seats
quickly, when the seat gets warm, select the
LO. Because it draws large amount of
current from the battery.
2
．
If the engine is left idling for an extended
period, don’t use the heater even on the LO
setting, it can weaken the battery, causing
the hard starting.
Power window
The car is equipped with the power window.
Turn the ignition switch to ON( ) position
Ⅱ
to raise or lower any window .
To open the window, push the switch down
and hold it. Release it when you want to
stop the window. Pull back on the switch
and hold it to close the window.