BYD F6, Owner'S Manual

Page: 36 / 215

F6 OWNER’S MANUAL
33
Hodometer
This meter shows the number of kilometers
driven since you last reset it.
There are two trip meters: Trip A and Trip B.
Switch these displays by pressing the
Select/Reset knob repeatedly. Each
hodometer works independently, so you can
keep track of two different distances.
When you turn the ignition switch to the
ON (II) position, what you last selected is
displayed.
To reset a trip meter, display it, and then
press and hold the Select/Reset knob until
the number resets to “0.0’’.
Coolant temperature gauge
This shows the temperature of the engine’s
coolant. During normal operation, the
reading should be in the middle of the gauge.
In severe driving conditions, such as very
hot
weather or a long period of uphill driving,
the reading may reach near the red mark. If
it reaches the red (Hot) mark, pull safely to
the side of the road. Refer to 125
th
page for
instructions and precautions on checking the
engine’s cooling system.
Fuel level gauge
This shows how much fuel you have. It is
most accurate driving on flat road; it may
show slightly more or less than the actual
amount driving on curl road or unsmooth
road.
The needle returns to the bottom after you
turn off the ignition. The needle show the
fuel reading when you turn the ignition
switch to ON( )
Ⅱ
Friendly tips
Avoid driving with an extremely low
fuel level. Running out of fuel could
cause the engine to misfire, damaging
the catalytic converter.