BYD F6 Owner'S Manual Download Page 134

Page: 134 / 215

F6 OWNER’S MANUAL

131

The capability of cooling system as
following:
BYD483QB engine
MT

：

6.3 L

Mitsubishi 4G69S4M engine
AT:
7.2 L

．

Run the engine about 30 seconds, then

turn it off.

11

．

Pour the coolant into radiator, till the

level is up to the bottom of the filler neck.

。

．

Pour the coolant into coolant reserve

tank to the MAX mark, cover the cap.

13

．

Put the radiator cap back, and tighten to

first stop position.

14

．

Run the engine itself, till the cooling fan

at least starts two times, then turn off the
engine.

15

．

Get down the radiator cap, then pour the

coolant and make the level up to the bottom
of the filler neck and MAX mark of reserve
tank.

．

Start the engine and keep the speed at

1500 r/m, till the cooling fan starts, then
turn off the engine. Check the coolant level
in the radiator, pour the coolant if necessary.

17

．

Put the radiator cap back and tighten it.

．

If necessary, pour the coolant into

reserve tank up to MAX mark, then cover
the cap.

Summary of Contents for F6
























































































































































































































Search results

Summary of Contents for F6

Reviews:

Related manuals for F6

Brands by name

Popular brands

BYD F6, Owner'S Manual

Search results

Summary of Contents for F6

Reviews:

Related manuals for F6

Brands by name

Popular brands