BYD F6 Owner'S Manual Download Page 130

Page: 130 / 215

F6 OWNER’S MANUAL

127

If the reserve tank is completely empty, you
should also check the coolant level in the
radiator.

Friendly tips

Open the radiator cap while the engine
doesn’t cool completely, it can cause
the coolant to spray out, seriously
scalding you.

Before opening the radiator cap, make sure
the engine and radiator both cool down.

1. Be sure the engine and radiator are both
cool.

2

．

Relieve any pressure in the cooling

system by turning the radiator cap
counterclockwise. (Do not press it down)

3

．

Remove the radiator cap by pushing

down and turning counterclockwise.

．

The coolant level should be up to the

bottom of the filler neck. Add if it is low.

Pour the coolant slowly and carefully, so
you do not spill any. Clean up any spill
immediately. The spilled coolant could
damage components in the engine
compartment.

Summary of Contents for F6
























































































































































































































Search results

Summary of Contents for F6

Reviews:

Related manuals for F6

Brands by name

Popular brands

BYD F6, Owner'S Manual

Search results

Summary of Contents for F6

Reviews:

Related manuals for F6

Brands by name

Popular brands