BYD F6, Owner'S Manual

Page: 40 / 215

F6 OWNER’S MANUAL
37
Turning signal
Using this operation rod can send turning
signal or lane change signal. Push down on
the left lever to signal a left turn and up to
signal a right turn. If you push the rod to the
top or the bottom, even you loose hands, the
turning signal lights will continuous flash,
and it will come off with a completely
turning.
To signal a lane change, push lightly on the
lever in the proper direction and hold it. The
lever will return to center when you release
it or complete a turn.
Combination instrument
illumination
The Select/Reset knob on the instrument
panel controls the brightness of the
instrument panel lights and the operation
buttons of central control board. Turn the
knob to adjust the brightness.
Counterclockwise rotation decreases
brightness and clockwise rotation increases
brightness, the brightness is the most dark
or bright when you hear a click. This button
can rotate illimitably, to protect the button,
please stop co rotating when you hear a
click
.
The instrument panel will illuminate with
reduced brightness when you open the
driver’s door. The brightness will increase
slightly when you insert the key in the
ignition switch, then go to normal
brightness when you turn the ignition switch
to the ON (II) position.
If you do not insert the key in the ignition
switch after opening the driver’s door, the
illumination will be off scores of
seconds
after you close the door.
If you insert the key but do not turn the
ignition switch to the ON (II) position, the
illumination will be off after several
seconds.
To reduce glare at night, the instrument
panel illumination dims when you turn the
light switch to or . Turning
the Select/Reset knob fully to the right until
you hear a click will cancel the reduced
brightness.